Conclusions In this work, a useful ammonia gas sensor based on chemically reduced graphene oxide
(rGO) sheets using self-assembly technique has been successfully fabricated and studied for the first time. Negative GO sheets with large sizes (>10 μm) can be easily electrostatically attracted onto positive Au electrodes modified with cysteamine hydrochloride in aqueous solution. The assembled GO sheets on Au electrodes can be directly reduced into rGO sheets by hydrazine or pyrrole vapor and consequently provides the sensing devices based on self-assembled rGO sheets. The NH3 gas sensing performance of the devices based on rGO reduced from pyrrole (Py-rGO) have been investigated and compared with that of sensors based on rGO reduced from hydrazine (Hy-rGO). It is found that assembled selleck chemical Py-rGO exhibits much better (more than 2.7 times with the concentration of NH3 at 50 ppm) response to NH3 than that of assembled Hy-rGO. Furthermore, this novel gas sensor based on assembled Py-rGO showed excellent responsive repeatability to NH3. Since this technique can be incorporated with standard microfabrication process, we suggest that the work reported here is a significant step toward the real-world application of gas sensors based on self-assembled rGO. Acknowledgments The authors gratefully acknowledge financial supports by the Natural Science Foundation of Jiangsu Province (no. BK2012184), the Natural Science
Foundation of the Jiangsu Higher Education Institutions of China (no. 13KJB430018), the National Natural Science Foundation of China (no. Sepantronium datasheet 51302179 much and no. 51102164), the Priority Academic Program Development
of Jiangsu Higher Education Institutions (PAPD), the Key Natural Science Foundation of the Higher Education Institutions of Jiangsu Province (no. 10KJA140048), the International Cooperation Project (no. 2013DFG12210) by MOST, Medical-Engineering (Science) cross-Research Fund of Shanghai Jiao Tong University (no. YG2012MS37 and no. YG2013MS20). References 1. Pandey S, Goswami GK, Nanda KK: Nanocomposite based flexible ultrasensitive resistive gas sensor for chemical reactions studies. Sci Rep 2013,2082(3):1–6. 2. Im J, Sengupta SK, Baruch MF, Granz CD, Ammu S, Manohar SK, Whitten JE: A hybrid chemiresistive sensor system for the check details detection of organic vapors. Sens Actuators B 2011, 156:715–722.CrossRef 3. Cella LN, Chen W, Myung NV, Mulchandani A: Single-walled carbon nanotube-based chemiresistive affinity biosensors for small molecules: ultrasensitive glucose detection. J Am Chem Soc 2010, 132:5024–5026.CrossRef 4. Meier DC, Raman B, Semancik S: Detecting chemical hazards with temperature-programmed microsensors: overcoming complex analytical problems with multidimensional databases. Annu Rev Anal Chem 2009, 2:463–484.CrossRef 5. Hangarter CM, Bangar M, Mulchandani A, Myung NV: Conducting polymer nanowires for chemiresistive and FET-based bio/chemical sensors.